Front panels in different colours

Application

You can choose from a wide variety of materials in various thicknesses. Clear anodised aluminium is an excellent choice for high-resolution printing with our industrial printing process. The only restriction is that it is not possible to print white. For colour-anodised aluminium we offer both digital printing (UV printing) and laser engraving. The colour-anodised layer of the material is removed on lasered areas during the laser-engraving process. The white layer that is uncovered now is used to present the motif. For transparent and coloured acrylic, we offer digital printing (UV printing). This can be applied to both the front and the rear side. Printed circuit board material FR4 is offered as a special item. However, neither printing nor engraving of this material are possible. Read more in our FAQs where you can also, for example, find tips on what you need to pay attention to when compiling your data. Please note that anodised materials always have bare cut edges (untreated aluminium). This is also true of any engraving on these materials.
Choice of front panel materials

Available material thickness

Clear anodised aluminium 0.04 inch (1.0 mm) 0.06 inch (1.5 mm) 0.08 inch (2.0 mm) 0.1 inch (2.5 mm) 0.12 inch (3.0 mm) 0.16 inch (4.0 mm)
Black anodised aluminium   0.06 inch (1.5 mm) 0.08 inch (2.0 mm) 0.1 inch (2.5 mm) 0.12 inch (3.0 mm)  
Blue anodised aluminium   0.06 inch (1.5 mm) 0.08 inch (2.0 mm) 0.1 inch (2.5 mm) 0.12 inch (3.0 mm)  
Green anodised aluminium   0.06 inch (1.5 mm) 0.08 inch (2.0 mm) 0.1 inch (2.5 mm) 0.12 inch (3.0 mm)  
Red anodised aluminium   0.06 inch (1.5 mm) 0.08 inch (2.0 mm) 0.1 inch (2.5 mm) 0.12 inch (3.0 mm)  
White powder coated aluminium   0.06 inch (1.5 mm) 0.08 inch (2.0 mm)   0.12 inch (3.0 mm)  
Untreated aluminium   0.06 inch (1.5 mm) 0.08 inch (2.0 mm) 0.1 inch (2.5 mm) 0.12 inch (3.0 mm)  
Aluminium, chrome-plated on rear   0.06 inch (1.5 mm) 0.08 inch (2.0 mm) 0.1 inch (2.5 mm) 0.12 inch (3.0 mm)  
Transparent acrylic   0.06 inch (1.5 mm) 0.08 inch (2.0 mm)   0.12 inch (3.0 mm) 0.16 inch (4.0 mm) 
Black acrylic         0.12 inch (3.0 mm)  
White acrylic         0.12 inch (3.0 mm)  
Red acrylic         0.12 inch (3.0 mm)  
Transparent red acrylic         0.12 inch (3.0 mm)  
Bare FR4 0.04 inch (1.0 mm) 0.06 inch (1.6 mm)        

 

Colour selection

Our colour examples are for illustrative purposes only and cannot be completely colour-consistent.
Colour for aluminium natural Field with the colour black
Clear anodised aluminium Black anodised aluminium

blue colour field

field colour green
Blue anodised aluminium Blue anodised aluminium

Field with the colour light red

Colour for aluminium raw
Red anodised aluminium Untreated aluminium

Colour for aluminium natural

Colour acrylic red
Aluminium, chrome-plated on rear (conductive) Red acrylic

Yellow colour of FR4 material
 
Bare FR4  
   

Transparent acrylic

 
Front panel Transparent acrylic colourless acrylic colourless Front panel transparent acrylic red
Transparent colourless acrylic Transparent red acrylic